Jump to content


Photo

Port Credit: Salmon “pier” fishing tips for noobs


  • Please log in to reply
427 replies to this topic

#161 Guest_Dilligaf0220_*

Guest_Dilligaf0220_*
  • Guests

Posted 27 August 2011 - 06:37 PM

Use something like this, 'tis the shiznit. $10.

Posted Image
  • 0

#162 jc53

jc53

    Crappie

  • Active Members
  • 439 posts

Posted 30 August 2011 - 06:13 PM

Been looking for that type of light everywhere and cannot find one. Dollar stores and all over the place. Can anyone give me a heads up to where I can find one?
  • 0

#163 MikeyMikey

MikeyMikey

    Largemouth Bass

  • Active Members
  • 1,736 posts

Posted 30 August 2011 - 06:38 PM

Been looking for that type of light everywhere and cannot find one. Dollar stores and all over the place. Can anyone give me a heads up to where I can find one?


I bought one from Bronte Outdoors some years ago but was a very low quality built.
  • 0

#164 FrankTheRabbit

FrankTheRabbit

    Crappie

  • Active Members
  • 365 posts

Posted 30 August 2011 - 06:57 PM

My Blackberry has a LED flash for the camera and there's a Flashlight app available for like a dollar. I found it to work much better than a traditional flashlight.
  • 0

#165 efka

efka

    Moderator

  • Active Members
  • 1,328 posts

Posted 30 August 2011 - 07:54 PM

bough this few years ago at bps, i think it was 5 bucks, works very good.


Posted Image
  • 0

#166 MikeyMikey

MikeyMikey

    Largemouth Bass

  • Active Members
  • 1,736 posts

Posted 31 August 2011 - 05:58 PM

I've been telling you guys, if you are just gonna use glow in dark cleos... Those do not need any special light other than any typical flash light. Now if you have one of those Moonshine glow in dark you would either want a camera flash or a good powerful uv/black light.
  • 1

#167 xxtacy69

xxtacy69

    Shiner Minnow

  • Members
  • 19 posts

Posted 01 September 2011 - 01:06 AM

My Blackberry has a LED flash for the camera and there's a Flashlight app available for like a dollar. I found it to work much better than a traditional flashlight.


The problem with that is that its gonna drain your battery and eventually screw up your battery life...the original BB battery comes for around $70 + tax vs a flash that you can buy at bronte for $6 + tax...trust me on the battery thing, i know it from experience.
  • 1

#168 salmotrutta

salmotrutta

    Largemouth Bass

  • Active Members
  • 1,747 posts

Posted 01 September 2011 - 01:21 AM

The problem with that is that its gonna drain your battery and eventually screw up your battery life...the original BB battery comes for around $70 + tax vs a flash that you can buy at bronte for $6 + tax...trust me on the battery thing, i know it from experience.


Glad I read this post, someone told me to download that app but it seemed silly. BB screen gives off enough light anyhow, if you're fumbling looking for the right key at night.
  • 1

#169 ret0dd

ret0dd

    Sunfish

  • Members
  • 168 posts

Posted 01 September 2011 - 01:21 AM

Not unless it's the company's bb :)
  • 0

#170 Guest_Dilligaf0220_*

Guest_Dilligaf0220_*
  • Guests

Posted 02 September 2011 - 01:54 PM

Been looking for that type of light everywhere and cannot find one. Dollar stores and all over the place. Can anyone give me a heads up to where I can find one?



I found mine at a surplus store in Hamilton. Lol maybe go to the Pacific Mall and buy one off one of the vendors :D
Walk into a camera store and ask about old flashes, I've got a mitt full of old camera flashes I've picked up here & there.

Even auto parts stores like Parts Source sells blacklights for ricer strip lighting.
  • 0

#171 fisher12

fisher12

    Perch

  • Active Members
  • 575 posts

Posted 07 September 2011 - 10:35 PM

I realizes your spoons had a split ring with a swivel, is that what most people do?
I don't think my spoons had a split ring on them

Edited by fisher12, 07 September 2011 - 10:38 PM.

  • 0

#172 Majstor

Majstor

    VIP Pro Staff

  • Active Members
  • 1,165 posts

Posted 07 September 2011 - 10:43 PM

fisher u buy ball bearing swivel and u tie that on, its much easier and better then tyin your line directly to the lure.

here it looks like this Posted Image
  • 0

#173 DEVIN

DEVIN

    Sunfish

  • Members
  • 200 posts

Posted 07 September 2011 - 11:09 PM

hey i kno this is a newby question but i would really like to try out port credit before majoirty of the fish make there way into the rivers.does anybody know what type action rod would i need? like a 9' medium action? because i have a 10' ultra light action and i dont think it will be able to handle chucking spoons. any advice would be greatly appreciated. Thank you guys ! :)

...DEV...
  • 0

#174 MikeyMikey

MikeyMikey

    Largemouth Bass

  • Active Members
  • 1,736 posts

Posted 08 September 2011 - 12:27 AM

hey i kno this is a newby question but i would really like to try out port credit before majoirty of the fish make there way into the rivers.does anybody know what type action rod would i need? like a 9' medium action? because i have a 10' ultra light action and i dont think it will be able to handle chucking spoons. any advice would be greatly appreciated. Thank you guys ! :)

...DEV...


Yes, 9' Medium Power is good enough.
  • 0

#175 Meppsman

Meppsman

    Sunfish

  • Active Members
  • 122 posts

Posted 08 September 2011 - 03:17 AM

BPS is selling a lure charger that can be put on a key chain. It's a lot more convenient than the old ones.
  • 0

#176 fisher12

fisher12

    Perch

  • Active Members
  • 575 posts

Posted 08 September 2011 - 04:00 PM

fisher u buy ball bearing swivel and u tie that on, its much easier and better then tyin your line directly to the lure.

here it looks like this Posted Image



the knot burst off two spoons at the part which is looped around the spoon's hole not at the knot itself.
Which knot do you use?


  • 0

#177 ret0dd

ret0dd

    Sunfish

  • Members
  • 168 posts

Posted 08 September 2011 - 04:42 PM

palomar knot

It's the simpliest and strongest knot to tie.

Just tag the ends with a cigarrette and your good.


There are stronger knots but it's like Velcro shoes :)
  • 0

#178 MikeyMikey

MikeyMikey

    Largemouth Bass

  • Active Members
  • 1,736 posts

Posted 10 September 2011 - 03:23 PM

I use palomar knot for braid lines.
And
Reversed clinch knot for all other.
  • 0

#179 MichaelAngelo

MichaelAngelo

    Crappie

  • Active Members
  • 362 posts

Posted 12 September 2011 - 09:36 PM

Openfire, this post is a godsend. I'd like to add on to this question: achieving casting distance with smaller spoons. Does anyone add a split shot up-line?

Also: are wire leaders a good idea for salmon?

EDIT: didn't realize this post was a year old! got rid of dup questions =P, also may have posted multiple times due to pressing the wrong button sorry!
  • 0

#180 jpct

jpct

    Sunfish

  • Members
  • 169 posts

Posted 13 September 2011 - 02:53 PM

Openfire, this post is a godsend. I'd like to add on to this question: achieving casting distance with smaller spoons. Does anyone add a split shot up-line?

Also: are wire leaders a good idea for salmon?

EDIT: didn't realize this post was a year old! got rid of dup questions =P, also may have posted multiple times due to pressing the wrong button sorry!


Just get a rod with enough backbone and whip that you can load it up and cast the smallest spoons a mile. It's all about the gear.

You can add split, but, it might mess with the action and creates a pinch point on the line causing another possible point of failure.

As for wire leaders, no need. 10lb mono is all I use.. Salmon teeth are sharp, but I've never had them bite my line in half.
  • 0