|
Let the debate begin!
#1
Posted 27 December 2012 - 10:36 PM
Of course any and all opinions are appreciated!
|
#2
Posted 27 December 2012 - 11:17 PM
#3
Posted 28 December 2012 - 12:51 AM
#4
Posted 03 January 2013 - 10:58 PM
Even though most centerpins have deep spools around 3/8" you only need to spool it about 3/4's of the way. I usually use about 150 yards of backing and then I spool with around 200-250 yards of mono(10lb). After a couple of outings I usually cut off about 5 to 10 yards due to line twist and damage, that's why I spool with just a little extra mono at first. If you are a beginner I suggest using a cheaper line until you get comfortable with casting, you will get birds nests and lots of line twist. It is a good idea to start cheap then after you're comfortable you can upgrade to better quality line.
hope this helps!
#5
Posted 04 January 2013 - 02:43 AM
#6
Posted 04 January 2013 - 04:13 AM
Nearly every experienced centerpin fishermen uses backing. Dacron tends to be most common. If you simply put all mono you will dig in too much on strong hooksets and big fish. You will also have nearly 700 yards or more on a reel if you don't use backing.....that's not cheap!!
Even though most centerpins have deep spools around 3/8" you only need to spool it about 3/4's of the way. I usually use about 150 yards of backing and then I spool with around 200-250 yards of mono(10lb). After a couple of outings I usually cut off about 5 to 10 yards due to line twist and damage, that's why I spool with just a little extra mono at first. If you are a beginner I suggest using a cheaper line until you get comfortable with casting, you will get birds nests and lots of line twist. It is a good idea to start cheap then after you're comfortable you can upgrade to better quality line.
hope this helps!
if he buys raven line as i used for 13 years. he will spend 12 bucks for 800 meters of line
|