Jump to content


Photo

Crankbaits


  • Please log in to reply
6 replies to this topic

#1 Bow Man

Bow Man

    Smallmouth Bass

  • Banned
  • 1,027 posts

Posted 22 January 2014 - 02:57 PM

Interesting read I came across:The biggest key to becoming a better crankbait angler is to pay attention to the vibration. Try to block out distractions and tune in to what your bait is doing. Feel the vibrations the whole cast and retrieve. Use the force! Concentrate on the vibration and keep a positive attitude. The more you pay complete attention to the steady vibration of the bait the easier you can detect a difference or change in the vibration. You can tell when your bait comes in contact with cover or when its about to. You can feel the rush of water that means a fish just rolled on your bait. Sometimes you just loose the vibration which means the fish has your lure or when you feel slack. Most strikes are not bone jarring but a slight difference in the vibration and almost feels like an interruption in the vibration. Most guys say well with a crankbait the fish hook themselves. Well, unless you spend hours sharpening your hooks and if the bass turns with your bait more than likely your missing fish. If you do not react to the strike you can have the sharpest hooks but guess what they can still spit it. You don't set the hook like a jig or worm but I sweep my rod to gather any slack and line stretch just that tension is enough to drive the hook but if your sitting there waiting for the fish to hook themselves your going to be waiting a long time. If your using a dead pulling crankbait where all you feel is the pull and not the vibration you will never feel the difference in vibration and will never have a clue how many fish hit and spit your bait. Color is a factor to what bait to use in what water color or clarity but your first step should always be vibration. Depth control, lip style, line size all need to be factored in also. When figuring out what retrieve to use I try to make an educated guess of what I think the activity level of the bass should be then tweak the way I work the bait as I learn more through the day. I feel that a single rattle or no rattle work best because it gives a bass more of a direction of where the bait is. Sound from rattles kinda spreads out and doesn't give much of a direction just an are of noise but vibration gives more of a pinpoint direction. Baits with tons of rattles in them call bass from an area and in clear water to slightly stained water can be very effective. You need to understand that rattle noise and vibration are two separate things. You can't put them in the same category. Vibration gives a pinpoint direction and rattles give a general direction. Rod position will effect the depth of your bait and will change the amount of feel you have. I try to point my rod to my bait and as the bait runs deeper follow it with my rod. If I keep my rod high it will loose depth if you point your rod to the side you will have a hard time feeling that rush of water I was talking about. Casting distance will effect the amount of room the bait has to reach its deepest running depth. Its kinda a game of angles if you get good at it you can hit structure or a depth zone with some consistency. Different lures that are identical will have different running depths so you need to play with them to figure out what depth they run. The depth on the lure package in most cases is an average running depth. Lur Jenson and DT lures are the few that have an accurate running depth not an average but always factor in casting distance and how much running room your bait has to reach that depth. A Bill Norman bait kinda slowly works its way to the depth and about when the bait reaches the boat is the max depth it will run. It took most of the cast distance to work down to that depth. As a bait gets close to the boat it looses depth and starts working its way to the surface. So if I make a long cast with this bait and reel it in about 30 feet out away from my boat is the max depth that bait will run. The DT baits are different because it digs as soon as you start reeling and in a short distance gains depth. Most baits don't do that and take more running room to reach the same depth. The wider the wobble the more resistance the bait has and the less depth the bait can go.

  • 1

#2 jmmartin

jmmartin

    Sunfish

  • Members
  • 54 posts

Posted 26 January 2014 - 05:50 PM

are you trying to sell somthing? why such detail on the lure motion and rattle?


  • 0

#3 Bow Man

Bow Man

    Smallmouth Bass

  • Banned
  • 1,027 posts

Posted 26 January 2014 - 06:24 PM

are you trying to sell somthing? why such detail on the lure motion and rattle?

Selling nothing, thought it was a interesting article on crankbaits for anyone who uses them.......The details are what make it a interesting article compared to most articles you read on forums, that usually consist of " yeah I use that one and it works for me so it must be good"

 

Why you looking to buy something? I am sure if you want I can find something to sell you. ;)


  • 0

#4 Kleiner

Kleiner

    Sunfish

  • Active Members
  • 266 posts

Posted 26 January 2014 - 07:37 PM

Well written, thanks Bow Man


  • 0

#5 Bow Man

Bow Man

    Smallmouth Bass

  • Banned
  • 1,027 posts

Posted 26 January 2014 - 07:43 PM

Well written, thanks Bow Man

 

Cheers K


  • 0

#6 alex111

alex111

    Earthworm

  • Members
  • 1 posts

Posted 27 January 2014 - 04:59 AM

well done its cool..........


  • 0

#7 nate82

nate82

    Shiner Minnow

  • Members
  • 29 posts

Posted 27 January 2014 - 01:17 PM

Good read


  • 0