Jump to content


Photo

Flouro Leader Pound test floating for Steelies

leader flourocarbon steelhead

  • Please log in to reply
12 replies to this topic

#1 BigT555

BigT555

    Shiner Minnow

  • Members
  • 43 posts

Posted 08 November 2018 - 12:24 PM

Hi there, 

 

Wondering what everyone uses for leader sizes when they float for steelhead.  I typically use 6lbs flouro but after breaking off 2 or 3 times setting hooks on saturday I switched to the 10lbs flouro line I use for spin fishing out of frustration.  Hooked into a fish within 15 minutes on my first hook set, nice 8ish lbs buck.

 

Maybe I just have a spool of bunk line but after that I'm considering just moving to 8 or 10 lbs permanently, unless I'm going for little creek shakers which I have a spool of 4lbs for.  I don't think that visibility is a big difference between each size with how thin the 10lbs even is, but I have read that the slightly thicker line can effect how the bait floats around underwater. 

 

What does everyone typically use?  Can you recommend a line type that I should be using at 6lbs that I won't break off as easily?  I use seaguar invisx line for the 6lbs, and I think the 10 is berkley vanish (which I have had great experience with, no fish have broken off on that stuff yet)

 

Thanks in advance


  • 0

#2 NADO

NADO

    Unaccomplished Steelheader

  • Moderators
  • 3,064 posts

Posted 15 November 2018 - 12:43 PM

Hi there, 

 

Wondering what everyone uses for leader sizes when they float for steelhead.  I typically use 6lbs flouro but after breaking off 2 or 3 times setting hooks on saturday I switched to the 10lbs flouro line I use for spin fishing out of frustration.  Hooked into a fish within 15 minutes on my first hook set, nice 8ish lbs buck.

 

Maybe I just have a spool of bunk line but after that I'm considering just moving to 8 or 10 lbs permanently, unless I'm going for little creek shakers which I have a spool of 4lbs for.  I don't think that visibility is a big difference between each size with how thin the 10lbs even is, but I have read that the slightly thicker line can effect how the bait floats around underwater. 

 

What does everyone typically use?  Can you recommend a line type that I should be using at 6lbs that I won't break off as easily?  I use seaguar invisx line for the 6lbs, and I think the 10 is berkley vanish (which I have had great experience with, no fish have broken off on that stuff yet)

 

Thanks in advance

 

I'm not a believer in using light line for steelhead. Even if i'm fishing the east ditches and the water is low and clear I wont go less than 6lb. I usually fish bigger rivers and use 8-10lb seaguar abrazex. If i'm fishing a small river and it has decent colour to it I wont go less than 8lb.

 

With that said, you shouldn't be breaking the 6lb lead on hooksets unless you are using a rod that is too powerful for 6lb. I have a Rainshadow XST which is a pretty beefy rod, if i'm fishing small rivers I will leave it at home and bring one of my lighter rods.


  • 0

#3 fisherman2280

fisherman2280

    Sunfish

  • Members
  • 156 posts

Posted 15 November 2018 - 03:31 PM

Totally agree on the 8lb line, seems strange but I feel 8lb is closer in strength to 10lb but 6 seems a long way from 8.


  • 0

#4 ChromeAddict

ChromeAddict

    Crappie

  • Active Members
  • 438 posts

Posted 15 November 2018 - 06:22 PM

I like using light line for steelhead. 4 or 5lb fluro, 6 in muddy water. 


  • 0

#5 Ibstacle

Ibstacle

    Sunfish

  • Members
  • 241 posts

Posted 16 November 2018 - 01:25 AM

All depends on your rod. I usually use redwing tackle blackbird #5.6 and #6.6 for steelhead


  • 0

#6 NADO

NADO

    Unaccomplished Steelheader

  • Moderators
  • 3,064 posts

Posted 16 November 2018 - 10:26 AM

It also depends on the brand you use, pay attention to the line diameter as one brands 6 lb can be the same diameter as another brands 8lb. There is a resource somewhere that showed breaking test results for the different brands and it is all over the map. Drennan is the most obvious brand that comes to mind when it comes to underrating the breaking strength.


  • 0

#7 BigT555

BigT555

    Shiner Minnow

  • Members
  • 43 posts

Posted 16 November 2018 - 04:05 PM

I was using a 13' light rod when I was breaking off on hook sets... so I think I must have a spool of bad line.  

 

I'll move up to 8 though based on what everyone's been saying.  


  • 0

#8 BRMZ

BRMZ

    Sunfish

  • Members
  • 91 posts

Posted 16 November 2018 - 10:11 PM

Yep 8 lb test fluorocarbon is the  the leader for me


  • 0

#9 Ibstacle

Ibstacle

    Sunfish

  • Members
  • 241 posts

Posted 17 November 2018 - 02:11 AM

I know people that mostly use 4lb test for steelhead! 


  • 0

#10 BRMZ

BRMZ

    Sunfish

  • Members
  • 91 posts

Posted 17 November 2018 - 07:33 PM

I know people that mostly use 4lb test for steelhead! 

And I know people who enjoys being whipped ;) 

On a serious note even ultralight pound test leader would work under certain circumstances with the right rod and enough room to tire the fish. Problem in my opinion is fight become to long and to stressful for fish to survive after release.


  • 0

#11 DILLIGAF?!

DILLIGAF?!

    Rainbow Trout

  • Active Members
  • 2,707 posts

Posted 20 November 2018 - 01:40 PM

4lb is ideal as long as you're using the right rod. If I'm swinging flies. I use 6-8. on average. 6lb during icy temps and 8lb when their running (spring)


  • 0

#12 Tacklelogic

Tacklelogic

    Shiner Minnow

  • Members
  • 49 posts

Posted 20 November 2018 - 11:47 PM

I have switched back to 8lb Trilene XL. more pliable than fluorocarbon. My hook ups with beads has increased because of this.


  • 0

#13 TRINIBOY

TRINIBOY

    Crappie

  • Active Members
  • 380 posts

Posted 21 November 2018 - 06:38 PM

I like using light line for steelhead. 4 or 5lb fluro, 6 in muddy water. 

same here..


  • 0





Also tagged with one or more of these keywords: leader, flourocarbon, steelhead